Where is the fuel filter located on a 1997 Toyota Camry LE?
Where is the fuel filter located on a 1997 Toyota Camry LE?
Locate the fuel filter, which is in the engine compartment, on the driver’s side and in front of the brake master cylinder. Use both of the 17mm open-end wrenches to loosen and disconnect the top gas line on the fuel filter.
How to replace fuel filter on Toyota Camry?
How to replace fuel filter Toyota Camry. 2.2 liter engine. Years 1991 to 2002. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
How is the fuel line attached to the fuel filter?
Fasten the fuel filter to the fuel line. Slide the fuel lines onto the front and back of the filter the same way they were attached to the old one. With the fuel line in place on the filter, slide the plastic clips through the holes on the fuel line nozzle to secure the line in place on the fuel filter.
How do you remove the fuel filter from a car?
Removing the Old Fuel Filter Disconnect the battery. Locate the fuel filter. Jack up the car if necessary. Place a bowl or bucket beneath the fuel filter. Remove the clips holding the fuel filter in place. Remove the fuel lines from the filter. Slide the fuel filter out of its bracket.
Is there a leak in the fuel filter?
Yes, access to the bottom is tight, but the magazine last year talked about some unusual construction of the fuel supply line that made it prone to small leaks after filter replacement.
How to replace fuel filter Toyota Camry. 2.2 liter engine. Years 1991 to 2002. – YouTube If playback doesn’t begin shortly, try restarting your device. Videos you watch may be added to the TV’s watch history and influence TV recommendations.
Can a throttle filter be removed from a Camry?
Accessing the throttle body intake is easier with the air filter box and air hose removed. Before torquing off the lower fuel line fitting, have a rag on hand to capture any fuel that may leak after removal.
How do you replace a gas filter on a car?
Grasp the filter firmly while applying loosening torque on the bolt. Place a bucket under the filter to capture gasoline; when the bolt is released, the filter will lose its vacuum. If the replacement filter came with a new bracket, remove the two 10 mm bracket retaining bolts from the vehicle frame.
How can I tell if my fuel filter is clogged?
After you remove a filter, you can determine how badly clogged it is by this test: remove as much gas as possible from the filter, wipe clean the filter input port, and then try to blow air through the intake fitting, as if blowing up a balloon. Some residual gas will blow out in the process.
