How do you reset the oil light on a 2005 GMC Yukon?
How do you reset the oil light on a 2005 GMC Yukon?
GMC Yukon Change Engine Oil Light Reset Procedures:
- Turn ignition switch to ON position with engine off.
- Fully depress and release the accelerator pedal 3 times within 5 seconds of turning key.
- Change Oil lamp will flash for 2-10 seconds while it resets.
- Once it stops flashing, the maintenance light reset is complete.
How to reset a change engine oil light on a 2002 GMC?
Press the gas pedal three times within five seconds. Wait for the oil light on your dash to blink for five seconds and then shut off. The “change engine oil” light has now been reset. “Chevrolet Express, GMC Savana Full-Size Van Repair Manual 1998-2007”; Mike Stubblefield; 2008
How to reset the oil life on a GMC Sierra?
1. Turn the ignition to run (one position before starting engine). 2. Immediately after Step 1 press and release the gas pedal 3 times within 5 seconds. 3. If the “Oil Life Reset” appears the system is resetting.
Is there a way to reset the oil change light?
If you’ve had your oil changed at an authorized dealer, the technician will reset the light as part of the service. If playback doesn’t begin shortly, try restarting your device.
How do you reset the oil light on a Honda Accord?
While the oil life message is displayed, press and hold the Enter button on the Driver Information Center for one second. 3. The Driver Information Center will display a reset acknowledgement message. Turn the key to the off position. After you’ve reset the oil light, turn the key to the off position.
Press the gas pedal three times within five seconds. Wait for the oil light on your dash to blink for five seconds and then shut off. The “change engine oil” light has now been reset. “Chevrolet Express, GMC Savana Full-Size Van Repair Manual 1998-2007”; Mike Stubblefield; 2008
How to reset the oil change and service warning on a Chevy?
Turn the key to the accessory power position. Push and hold the Enter button for one second after the oil life message appears. Turn the key to the off position after the Driver Information Center displays a reset message. Have a Chevy or GMC that doesn’t follow these rules? Leave a comment below to let other readers know!
When to reset GMC Sierra Oil Life Light?
2007-2014 GMC Sierra Oil Life Light Service Minder Reset Time needed: 7 minutes. When the remaining oil life is low, the Change Engine Oil Soon message will appear on the display. The Oil Life display must be reset after each oil change.
How to reset the oil change light in my 2006 Chevrolet TrailBlazer?
Rotate the key back to the “Lock” position, and remove it. Wait a few moments, and then start the Trailblazer normally. The engine oil light on the dash should no longer be illuminated. The light will stay off until it is time to change the oil again.
