Close

2021-04-07

Can you work out the volume of a cube with a length of 10 cm width of 5 cm and a height of 8 cm?

Can you work out the volume of a cube with a length of 10 cm width of 5 cm and a height of 8 cm?

Answer. = 400 cm³ ans.

Can you work out the volume of a cube with a length of 10 cm?

Given, the side length = 10 cm. Substitute a = 10 in the formula. Therefore, the volume of the cube is 1000 cm3.

How do you measure the volume of a Ziploc bag?

Determine the volume of the bag by filling it with water, then pouring the water into a graduated cylinder. Record this volume(in liters) in the data section. 3. Measure the temperature and air pressure of the room.

What do you mean by 1 unit water?

One unit of a liquid is considered as the equivalent of one liter of the same. Thus, one unit of water equals one liter in Delhi.

How do you convert area to liters?

Dividing the volume (in cubic centimeters) of the shape by 1,000 will give you the volume in liters (L). . So, a fish tank that is 40.64 cm long, 25.4 cm wide, and 20.32 tall has a volume of 20.975 L.

Why is 1m 3 1000l?

1 cubic meter is 1×1×1 meter. It has units m3. A liter is liquid amount measurement. 1 liter of milk, 1 liter of water, etc.

How many Litres is 1m3 water?

Cubic Meters to Liters table

Cubic Meters Liters
0 m³ 0.00 L
1 m³ 1000.00 L
2 m³ 2000.00 L
3 m³ 3000.00 L

How do you find the volume of a pipeline?

Here’s a specific example of how to apply the volume of a pipe formula:

  1. For a 1-inch pipe that measures 50-feet long:
  2. radius = 1 inch ÷ 2 = . 5 inch. length = 50 × 12 inches = 600 inches. volume = π (pi) × radius squared × length. volume = 3.14159 × (. 5 x . 5) × 600. volume = 3.14159 × . 25 × 600. volume = 471.24 in³

What is the volume of a 4 inch pipe?

Volume and Weight of Water for Common Pipe Sizes

Pipe Size Volume
in in3/ft gallons/ft
3″ 84.823 in3 0.3672 gal
4″ 150.8 in3 0.6528 gal
5″ 235.62 in3 1.02 gal

How do you find the volume of a tunnel?

Density is determined using the formula D = M / V where D is the density expressed in tonne per m³, M is the mass expressed in tonnes and V is the volume expressed in m³. This algorithm can be rearranged to make M the subject of the formula.